Expert Tips About Timber Floor Sanding and Polishing Brisbane

Expert Tips About Timber Floor Sanding and Polishing Brisbane

If you want to make sure that your timber floor looks dazzling and beautiful, you should consider floor sanding and polishing. However, if you haven’t ever sanded a floor before, it might seem a bit tricky at first. The following are a few tips from the experts at timber floor sanding and polishing in Brisbane. Make sure you follow these for a smooth sanding experience.

Sanding the floor

  • In order to begin sanding you would require a drum sander and an edge sander for corners and floor edges. These tools are easily available from hire shops. Do keep in mind that when you use a sander you need to make sure your eyes and ear are protected. Do buy ear and eye masks.
  • The timber floor needs to be sanded at least four times if you are looking for a smooth and glazed finish. For the first round of sanding make use of a 40 grit sanding disc. Once done you can move up to 60, 80 and 120 respectively.
  • Always move the sander in the forward direction as soon as it touches the floor. It should be done slowly with a steady hand.
  • In order to make sure that the gliding remains smooth do spray kerosene on to the floor after certain intervals.
  • All nail holes need to be filed with timber putty. This is something which you should consider after the first round of sanding is over and you are about to start with a higher grit paper.
  • The putty that you use should match in color with the floor.
  • When you are about to sand the corners and the crevices you should switch to using an edge sander. Do not use a sander over 80 grit disc.

Polishing the floor

  • You can get two kinds of floor finishes. Which one you choose would depend upon your own personal preference.
  • You have the choice of using polyurethane finishes or an oil based resin. No matter which of these you decide to use, you should make sure that you are wearing the right protective gear before you start polishing.
  • You can find floor finishes in matte, glossy and semi-glossy. For a floor which is exposed to high traffic a glossy finish isn’t ideal because it can actually highlight the scratches over time. Instead a matte or semi-gloss finish is always a good option.
  • Before you start with the polishing do rub the surface with a cloth dipped in methyl spirit to get rid of any residue left by the sanding.
  • Make use of a roller to ensure a smooth finish
  • The first coat of polish should be allowed to dry for at least eight hours. Once it’s dried use a 120 grit and paper and remove the dust before you plan on applying a second coat. The second coat should be left to dry overnight and then a third coat of polish should be applied.

While floor sanding and polishing on your own can help save you money, often it’s not an option because of a number of reasons. In this case, hire a professional sanding and polishing service in Brisbane.

Bethany Hoskins

Leave a Reply

Your email address will not be published. Required fields are marked *